94
www.sauservice.com
● Follow instructions of "Replacing the Microswitch" to remove the cover L.
● Remove the connector to replace the sensor unit.
REPLACING THE SENSOR UNIT
SENSOR UNIT
JPT-2030
Remove the connector.
PHOTO 10 f
● Refer to the previous item, then attach COVER R while being careful of each of the parts.
● After replacement, perform a GUN ADJUSTMENT, referring to the instructions in "Game Test Mode".
REPLACING THE SOLENOID
● Follow instructions of "Replacing the Microswitch" to remove the cover L.
To Next Page
Loading...
