21
www.sauservice.com
● Install Mask to the PTV front. Install the Mask in a manner hooking up to both 2 Mask
Bracket Uppers and the Mask Bracket Lower. Simultaneously insert the projections of
the Mask into the square holes in the PTV screen left and right.
● Secure the Mask by fastening a screw for each from both sides of PTV.
MASK
● Affix the side bracket L and side bracket R to the PTV front face using 2 screws each. Be careful of the
orientation of the parts.
FIG. 6. 2 b
SCREW (2 ea), black
M5×16, w/flat & spring washers
SIDE BRACKET L
SIDE BRACKET R
PHOTO 6. 2 a
TRUSS SCREW (2), black
M5×25, flat washer used
To Next Page
Loading...
