89
5. Measuring Light Sources [Measurement Screen]
NOTE
If you are not using LB index/lter and CC index/lter values, you can omit this
step.
You cannot set the target color temperature in "Spectrum Comp.", "CRI", "CRI
Comp.", "SSI", "TLCI/TLMF" and "Multi Lights" Modes.
3.
Touch the [T (Shutter Speed)] indication on the Measurement
screen.
Set the shutter speed used for measurements. (
P24)
Match the blue background with the desired shutter speed.
NOTICE
Select a shutter speed range that will synchronize with your camera and
ash system.
Measuring Screen
Shutter Speed Selection Screen
[T (Shutter Speed)] Indication
The selected
value is
indicated
by the blue
background.
[Cancel]
Button
[OK] Button
To Next Page
Loading...
