Sekonic SPECTROMASTER C-800 - Factory Setting

170
7. Meter Settings [Setting] Screen
2.
Turn the Light Selection Ring ❷ to set to the dark calibration
position ( ).
The status bar will display the dark calibration Icon.
3.
Touch the [Yes] button.
"Dark calibration in progress. Please wait" and the status bar will appear while
calibrating.
To return to the Setting screen without performing dark calibration, touch the [No] button.
NOTICE
While the message "Dark calibration in progress. Please wait." or the
progress bar is displayed, do not turn the power off.
The dark calibration is completed.
Light Selection Ring
❷
Dark Calibration
Process Screen
Dark Calibration
Conrmation Screen
[No] Button[Yes] Button
Status Bar