79
4. Basic Operations
9.
Touch the radio button of the light source to set as the standard.
( : Selected, : Not selected)
Correction value of each other light sources (not selected as standard) are displayed
in any value you selected on the Display Item screen
.
If LB/CC index or LB/CC Light Filter is selected, the reference value area will display "-----".
Also if any selected indication values in other light sources displays "-----", it means there is little
value to correct.
NOTE
To clear all of the measurement results and start a measurement comparison again,
touch the [Clear] button.
The Multi Lights Clear Conrmation screen will be displayed.
Touch the [Yes] button.
All (A ~ D) will be deleted, and it will return to the Multi Lights screen.
When the [No] button is touched, the display returns to the Multi Lights screen
without deleting the values.
[No] Button
[Yes] Button
[Clear]
Button
Multi Lights Screen Clear Conrmation Screen
Standard Selection Radio Button
Selected Status
Corrected Value Display
Multi Lights Screen
To Next Page
Loading...
