Selve commeo - Switching between Touch Control and Automatic End Run

EN
115
BASIS version
15.7.2. Switching between touch control and automatic end run
Note: This section describes how to set touch control for a group, i.e. multiple drives and
receivers. You can activate/deactivate touch control for individual channels separately in the
“Channels” menu.
Select the “Touch control” menu item using the movement buttons
(up) and
(down). Use the channel selection buttons and
to acti-
vate/deactivate the function.
: “Touch control” activated.
: “Touch control” deactivated.
Press the right display button
to save and return to the menu.
Note: When touch control is activated, the drive moves when you press the movement
buttons
(up) and (down) with a delay of 0.5 seconds. Once you release the movement
button, the drive will stop within one second. If you press and hold the button for longer than
1 second, the drive will switch to automatic end run mode.
Touch control is deactivated upon delivery.