Bitrate overflow:
The net stream bitrate exceeds the
maximum bitrate Ethernet threshold
value specified by the operator.
Default: Enabled,
severity Error
Bitrate underflow:
The net stream bitrate goes be-
low the minimum bitrate Ethernet
threshold value specified by the op-
erator.
Default: Enabled,
severity Error
FSM alarms
Full service monitoring:
No reply was obtained within time-
out period for the configured FSM
service
Default: Enabled,
severity Major
ETR (ETR 290) alarms
TS Sync: No TS Sync (no signal) Default: Enabled,
severity Major
Sync byte:
Sync byte error, sync byte not 0x47
Default: Enabled,
severity Major
PAT: Program Association Table error Default: Enabled,
severity Major
Continuity: Continuity counter error Default: Enabled,
severity Major
PMT: Program Map Table error Default: Enabled,
severity Major
PID: PID is missing Default: Enabled,
severity Major
Transport:
Transport stream error indicator is
set
Default: Enabled,
severity Major
CRC: Table checksum error Default: Enabled,
severity Major
PCR: Program Clock Reference error Default: Enabled,
severity Major
PCR Accuracy:
Program Clock Reference accuracy
error (PCR jitter)
Default: Enabled,
severity Major
PTS: Presentation Time Stamp error Default: Enabled,
severity Major
CAT: Conditional Access Table error Default: Enabled,
severity Major
VB2xx GigE User’s Manual version 5.4 57
To Next Page
Loading...
Need help?
General
