NIT: Network Information Table error Default: Enabled,
severity Major
SI Rep Rate: Wrong repetition rate for SI tables Default: Enabled,
severity Major
Unref PID: PID is unreferenced Default: Enabled,
severity Major
SDT: Service Description Table error Default: Enabled,
severity Major
EIT: Event Information Table error Default: Enabled,
severity Major
RST: Running Status Table error Default: Enabled,
severity Major
TDT: Time Date Table error Default: Enabled,
severity Major
MGT:
Master Guide Table error (ATSC
mode)
Default: Enabled,
severity Major
VCT:
Virtual Channel Table error (ATSC
mode)
Default: Enabled,
severity Major
PIM/PNM: PIM/PNM error (ATSC mode) Default: Enabled,
severity Major
RRT:
Region Rating Table error (ATSC
mode)
Default: Enabled,
severity Major
ATSC EIT:
ATSC EIT Table error (ATSC mode)
Default: Enabled,
severity Major
STT:
System Time Table error (ATSC
mode)
Default: Enabled,
severity Major
ETT:
Extended Text Table error (ATSC
mode)
Default: Enabled,
severity Major
CA System: CA System error Default: Enabled,
severity Major
PID min. bitr.
PID minimum bitrate below thresh-
old
Default: Enabled,
severity Major
PID max. bitr.
PID maximum bitrate exceeds
threshold
Default: Enabled,
severity Major
PID checks: PID check error Default: Enabled,
severity Major
Service min. bitr.
Service minimum bitrate below
threshold
Default: Enabled,
severity Major
Service max. bitr.
Service maximum bitrate exceeds
threshold
Default: Enabled,
severity Major
58 VB2xx GigE User’s Manual version 5.4
To Next Page
Loading...
Need help?
General
