Multicast
Name:
The name of the multicast containing the selected service, as defined by the
user
Type: The type of the stream containing the selected service; multicast or unicast
Multicast address: The multicast address of the stream containing the selected service
Multicast port: The port number of the multicast containing the selected service
Transport stream ID:
The ID of the selected stream as shown in the list of multicasts in the Ethernet
section; non-TS services display 1 here
Stream status:
The status of the stream containing the selected service, as reported by the
decoding engine
Bitrate:
The total stream bitrate of the multicast containing the selected service (bits/s)
Service
Service ID:
The service ID of the selected service; non-TS services display 1
here
PSI/SI Name:
The name of the selected service, as derived from PSI/SI; non-TS
services display the multicast name here instead
Controlbit scramble state: The scramble state as indicated by the MPEG TS control bit
PES sync scramble state: The scramble state as detected from the PES sync state
Number of PIDs/Components:
The number of PIDs or components associated with the selected
service
Bitrate: The total bitrate of the selected service (bits/s)
Video PID/Component
PID/Component:
The video PID of the selected service for MPEG-TS services, or the video
component number for non-TS services
Has PCR: Yes if the selected stream contains PCR, No if not
Bitrate: The video PID bitrate of the selected service
PES sync: The latest PES sync state
PES length indicator:
If signaled in the PES packet header, the PES packet length is displayed; for
non-TS services “N/A” is displayed
Status: The status of the video PID as reported by the decoding engine
Video Information
Size: The video picture size of the selected service
Aspect ratio:
The video aspect ratio of the selected service, or “N/A” if no information is
available
VB2xx GigE User’s Manual version 5.4 89
To Next Page
Loading...