Pixel aspect ratio:
The video pixel aspect ratio of the selected service, or “N/A” if no information is
available
Codec: The video encoding format of the selected service
Quality: The video sampling format of the selected service
Frame rate: The video frame rate of the selected service (Hz)
Audio PID/Component
PID/Component:
The audio PID of the selected service for MPEG-TS services, or the audio
component number for non-TS services
Note that there may be several audio PIDs or components associated with a
service
Type: The audio encoding standard
Has PCR: Yes if the selected Audio PID contains PCR
Language:
The language of the audio, as defined in the MPEG-TS Program Map Table (PMT)
Bitrate: The audio bitrate for this PID or component (bit/s)
Is scrambled: ‘Yes’ if the audio PID is scrambled.
Peak level:
The peak audio level in dB, detected during a period of approximately 0.4 seconds
Average level:
The average audio level in dB, measured over a period of approximately 0.4
seconds
Audio Information PID/Component
Codec: The audio encoding format
Samplerate: The audio sample rate (Hz)
Channels: The number of audio channels represented by the audio PID or component
Layout: The audio channel layout
Format: The binary format of the audio stream
Bitrate: The effective audio bitrate (bit/s)
90 VB2xx GigE User’s Manual version 5.4
To Next Page
Loading...