SEW DRC2 - Page 115

Operating Instructions – Electronic Motor DRC.-..-SNI
115
8
Description of power section parameters
Parameters
Power section parameters \ display values \ binary inputs
Binary inputs
DI00 – DI04
index 8334.0,
bits0–4
The parameter shows the present state of binary inputs DI00 – DI04.
Binary input DI00 is always assigned with /controller inhibit.
Binary inputs
DI00 – DI04
index 8335.0 –
8338.0
The parameter shows the current function assignment of binary inputs DI00 – DI04.
Binary input DI00 is always assigned with /controller inhibit.
Binary inputs
DI10 – DI17
index 8348.0,
bits 0 – 7
The parameter indicates the present state of the binary input of an application option
(e.g. GIO12B). If the option is not installed, the virtual binary inputs will be displayed.
Binary inputs
DI10 – DI17
index 8340.0 –
8347.0
The parameter indicates the current function assignment of the binary input of an appli-
cation option (e.g. GIO12B). If the option is not installed, the virtual binary inputs will be
displayed.
Power section parameters \ display values \ binary outputs
Binary outputs
DO10 – DO17
index 8360.0,
bits0–7
The parameter indicates the present state of the binary outputs of an application option
(e.g. GIO12B). If the option is not installed, the virtual binary outputs will be displayed.
Binary outputs
DO10–DO17
index 8352.0 –
8359.0
The parameter indicates the current function assignment of the binary outputs of an
application option (e.g. GIO12B). If the option is not installed, the virtual binary outputs
will be displayed.
Power section parameters \ display values \ unit data
Unit series index
9701.10
The parameter indicates the unit series, for example "DRC".
Variant ID index
9701.11
The parameter indicates the unit generation, for example "B".
Unit name
index 9701.1,
9701.2, 9701.3,
9701.4, 9701.5
The parameter indicates the type designation of the power section.
Unit variant index
10204.2
The parameter indicates the DRC installation technology, e.g.:
•DBC = D
irect Binary Communication
•DAC = D
irect AS-Interface Communication
•DSC = D
irect SBus Communication
•SNI = S
ingle Line Network Installation
00
I