SharkRF openSPOT3 - Sharkrf IP Connector Client

SharkRFIPConnectorClientconnector
YoucanusethisconnectortodirectlyconnecttoanotheropenSPOT,openSPOT3,oranetworkwhichsupports
theSharkRFIPConnectorprotocol,orouropensourceSharkRFIPConnectorProtocolServer.Theprotocol's
documentationcanbefoundonGitHub,soyoucanalsodevelopyourownapplicationfortheopenSPOT3.
TheeasiestwayistousetheQuicksetuptoconnecttoaSharkRFIPConnectorserver.
IfyouwanttoconnectdirectlytoanotheropenSPOToropenSPOT3,makesurethattheanotherdeviceissetup
astheserver,andtheUDPportusedbythisconnector(bydefaultit's65100)iscorrectlysetupontheserver's
router(it'sopenonthefirewallandisforwardedtotheserveropenSPOT1/2/3onit'slocalnetwork).
Allmodemmodesaresupportedbythisconnector,withautomaticcrossmodeconversionbetweenthefollowing
modes:
DMR,D-STAR®,C4FM(DNmode)andNXDN®.
C4FM(VWmode)andP25.
SharkRFIPConnectorClient
100