EasyManua.ls Logo

SharkRF openSPOT3 - Transcode Gain Settings; Lock Settings

SharkRF openSPOT3
131 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Thereare16timeslotsforPOCSAG,thesetimeslotsettingscanbeoverriddenbytheDAPNETserverwhenthe
DAPNETconnectorisconnectedunlesstheDonotallowDAPNETtooverridetimeslotscheckboxischecked.
Eachtimeslotis6.4secondslong.TheopenSPOT3willonlystarttransmittingPOCSAGmessagesifthecurrent
timeslotisallowed.
Transcodegainsettings
ThissectionisonlyavailableifAdvancedmodeisenabled.
Thesesettingsallowsyoutoadjustthegainusedduringtranscodingtocorrectthevolumedifferencebetween
systems.
Locksettings
ThissectionisonlyavailableifAdvancedmodeisenabled.
Settingspage
58

Related product manuals