SharkRF openSPOT3 - Homebrew;MMDVM

Homebrew/MMDVM®connector
YoucanusethisconnectortoconnecttoanetworkwhichsupportstheHomebrewortheMMDVM®protocol,
likeBrandMeister,DMRplus,Phoenix,DMR-MARC,XLX.
TheeasiestwayistousetheQuicksetuptoconnecttothesenetworks.
Thisconnectorsupports2protocols:HomebrewandMMDVM®.UsetheHomebrewprotocoltoconnectto
BrandMeisternetworkservers,andtheMMDVM®protocoltoconnecttoDMRplus,Phoenix,DMR-MARCorXLX
servers.
ThedefaultserverpasswordforBrandMeisterserversispassw0rdorpassword,butsomeserversdonotusethese
defaults.InthiscasetakealookattheBrandMeisterwiki,orasktheserver'sadminforthepasswordifthe
openSPOT3won'tconnectwiththedefaultone.
Ifyoucan'tconnecttoaBrandMeisterserverbecausetheauthenticationhasfailed,thenturnoffHotspot
SecurityonyourBrandMeisterSelfCarepage,orusethehotspotpasswordyou'vesetthereastheserver
password.
IfyouareusingaBrandMeisterserverinHomebrewprotocolmode,youcanseethelistofcurrentlylinkedstatic,
dynamictalkgroupsandreflectorsontheopenSPOT3'sStatuspage.
Crossmodeusage
TheHomebrew/MMDVM®connectorisaDMRconnector,butitsupportsD-STAR®,C4FMandNXDN®cross
modes.
Incrossmodes,youcansettheRoutecrossmodecallstoIDtothetalkgroupIDyouwanttotalkto(setthecall
typetoGroupcall).IfyouuseacrossmodewhichisID-based(likeNXDN®),thenthisID(andcalltype)willbe
automaticallyupdatedbasedonwhatIDyoucallonyourradio.ThisIDwillbeautomaticallyusedifyoucallthe
Homebrew/MMDVM®
78