SharkRF openSPOT3 - Control Calls and Cross Modes

Controlcalls
TherearesomespecialIDsandcallsignswhichtriggerbuilt-inservicesandactionswhenacallisreceivedto
themfromyourradio.
Localechoservice
Ifthelocalechoservice'sIDorcallsigniscalled,theopenSPOT3recordsthevoicetransmissionandplaysitback
afterthecallfromtheradioisfinished.Thisisusefulforhearingyourownvoicebacktotesttheconnection
betweenyourradioandtheopenSPOT3.Ifyouhavelocalechovoicequalityissues,seetheAutoCalspecial
connector.
ThelocalechoservicecanbetriggeredifthecallissenttothefollowingIDs/callsigns:
DMR,NXDN®andP25:**ID9999.BothprivateandgroupcallstothisIDareansweredwithaprivatecall.
D-STAR®:callissentto .......E(7spacesandanE,replacedotswithspaces).NotethatcurrentlytheD-
STAR®echoreplyislimitedaround2seconds.
C4FM:callDGIDissetto99.
Notethatonlyabout10secondscanberecordedandplayedbackbythelocalechoservice.
Currentconfigurationprofilequery
Thecurrentconfigurationprofile'snumbercanbequeriedbycallingthefollowingIDs/callsigns:
DMR,NXDN®andP25:ID9000.Bothprivateandgroupcallsareinterpreted.
D-STAR®:callissentto .......P(7spacesandanP,replacedotswithspaces),orDTMFcodeAisentered.
C4FM:Specialcommand/crossmodeprivatecallDTMFcode(bydefaultit's*)isenteredfollowedbyDTMF
codeA.
Thecurrentconfigurationprofilenumberwillbeannouncedbythevoice.TheDMR/NXDN®/P25profilequeryID
canbechangedontheSettingspage,Voiceannouncementssection.
Changeconfigurationprofile
TheactiveconfigurationprofilecanbechangedbycallingthefollowingIDs/callsigns:
DMR,NXDN®andP25:ID9000+configurationprofilenumber.Example:toswitchtoconfigprofile1,starta
shortcallto9001.Bothprivateandgroupcallsareinterpreted.
D-STAR®:callissentto .......1(7spacesandtheconfigurationprofilenumber,replacedotswithspaces),
orDTMFcodeAisenteredfollowedbytheconfigurationprofilenumber.
C4FM:Specialcommand/crossmodeprivatecallDTMFcode(bydefaultit's*)isenteredfollowedbyDTMF
codeA,thenthedesiredconfigurationprofilenumber.
Connectorstatusquery
Thecurrentlyactiveconnector'sstatuscanbequeriedbycallingthefollowingIDs/callsigns:
DMR,NXDN®andP25:ID9998.Bothprivateandgroupcallsareinterpreted.
D-STAR®:callissentto .......I(7spacesandanI,replacedotswithspaces),orDTMFcodeDor0is
entered.
C4FM:Specialcommand/crossmodeprivatecallDTMFcode(bydefaultit's*)isenteredfollowedbyDTMF
codeD.
Controlcalls
104