SharkRF openSPOT3 - Sharkrf IP Connector Server

SharkRFIPConnectorServerconnector
YoucanusethisconnectortoacceptconnectionsfromanotheropenSPOTandopenSPOT3devices.This
connectoronlysupports1activeconnection,soifyouwanttolinkmorethan1device,youcanuseouropen
sourceSharkRFIPConnectorProtocolServer.Theprotocol'sdocumentationcanbefoundonGitHub,soyoucan
alsodevelopyourownapplicationfortheopenSPOT3.
TheeasiestwayistousetheQuicksetuptosetupthisconnector.
MakesurethattheUDPportusedbythisconnector(bydefaultit's65100)iscorrectlysetuponyourrouter(it's
openonthefirewallandisforwardedtotheopenSPOT3'sIPaddress).
Allmodemmodesaresupportedbythisconnector,withautomaticcrossmodeconversionbetweenthefollowing
modes:
DMR,D-STAR®,C4FM(DNmode)andNXDN®.
C4FM(VWmode)andP25.
SharkRFIPConnectorServer
101