SharkRF openSPOT3 - C4 Fm;Fusion APRS

C4FM/Fusion®APRS®
YoucansetuptheopenSPOT3toforwardyourC4FM/Fusion®transceiver'slocationinformationtotheAPRS®
network,soitwillbevisibleonAPRS®mapslikeaprs.fi
SettinguptheAPRS®connection
FirstyouhavetosetuptheAPRS®specialconnectorusingtheopenSPOT3'sQuickSetup.
MakesureyouchecktheEnableinbackgroundcheckbox.Youdon'tneedtochecktheAllowuploadingdevice
locationcheckboxforC4FM/Fusion®locationforwarding.
YoucanverifytheAPRS®connectionstatusontheStatuspage.
SettingupyourC4FM/Fusion®transceiver
ThefollowingsetupisdescribedusingtheYaesuFT2D'smenustructure.Themenustructureofyourtransceiver
maybedifferent,butthenamesofthesettingsshouldbethesameorsimilar.
Settingupyourtransceiver
26