EasyManua.ls Logo

SharkRF openSPOT3 - Dmrplus Dongle

SharkRF openSPOT3
131 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DMRplusdongleconnector
YoucanusethisconnectortoconnecttoanetworkwhichsupportstheDMRplusdongleprotocollikeDMRplus,
Phoenix,DMR-MARC,XLX.
TheeasiestwayistousetheQuicksetuptoconnecttothesenetworks.
YoucanchangetheusedreflectorIDbystartingashortprivatecallonyourradiotothedesiredreflectorID
(between4000and5000).
Crossmodeusage
TheDMRplusdongleconnectorisaDMRconnector,butitsupportsD-STAR®,C4FMandNXDN®crossmodes.
D-STAR®notes
YoucanswitchreflectorswithaD-STAR®radiousingtwomethods:
SetthereflectorIDastheD-STAR®radio'sURCALL,thenstartashortcall.Aftertheshortcall,setbackthe
URCALLto CQCQCQ.
DTMFcodes:enter*followedbythereflectorIDinDTMFcode.
C4FMnotes
IfyouuseaC4FMradio,makesureitisindigitalnarrow(DN)mode,otherwiseyourcallscan'tbeconvertedand
onlysilencewillbesenttothenetwork.
YoucanswitchreflectorsfromyourradiobyenteringCrossmodegroupcallDTMFcode(bydefaultit's*)
followedbythereflectorIDinDTMFcode,orusetheWires-X®buttonmenutoselect/searchforservers.
Example:toswitchtoreflector4770,enterDTMFcode *4770.
DMRplusdongle
82

Related product manuals