SharkRF openSPOT3 - D-Star Aprs

D-STAR®APRS®
YoucansetuptheopenSPOT3toforwardyourD-STAR®transceiver'slocationinformationtotheAPRS®
network,soitwillbevisibleonAPRS®mapslikeaprs.fi
SettinguptheAPRS®connection
FirstyouhavetosetuptheAPRS®specialconnectorusingtheopenSPOT3'sQuickSetup.
MakesureyouchecktheEnableinbackgroundcheckbox.Youdon'tneedtochecktheAllowuploadingdevice
locationcheckboxforD-STAR®locationforwarding.
YoucanverifytheAPRS®connectionstatusontheStatuspage.
SettingupyourD-STAR®transceiver
ThefollowingsetupisdescribedusingtheIcomID51'smenustructure.Themenustructureofyourtransceiver
maybedifferent,butthenamesofthesettingsshouldbethesameorsimilar.
Settingupyourtransceiver
19