SharkRF openSPOT3 - Brandmeister Manager

ThequickcallfeatureisavailablewhentheHomebrew/MMDVM®connectorisactive.
Reflectorandtalkgrouplinking(andunlinking)isdonebythenetwork,nottheopenSPOT3.TheopenSPOT3
hastomakequickcalls,whicharethesameaspressingPTTforashorttimeonaradio(kerchunking).These
emptycallswillalsoshowupontheBrandMeisterNetwork'sdashboard.
Quickcallisusefulforlinking/unlinkingtalkgroupsandreflectors.StartingashortprivatecalltoareflectorID
(between4000and5000)willlinkthereflector.StartingashortgroupcalltoatalkgroupIDwilllinkthatTG.
OntheBrandMeisternetwork,reflectorsareunlinkedbystartingaprivatecalltoID4000,andbothreflectors
andtalkgroupsareunlinkedbystartingagroupcalltoID4000.
QuickcallshortcutscanbestoredintheopenSPOT3'scurrentconfigurationprofile.Ifyouhoverthemousecursor
overasavedtalkgroup'sbutton,orthebuttonispressedforafewsecondsthenthe(BrandMeister)talkgroup's
namewillappear.
IftheAutogroupcall4000beforeshortcutcallcheckboxischecked,thentheopenSPOT3willautomatically
startaquickcalltoTG4000tounlinkeverythingbeforequickcallingthedesiredID.
BrandMeisterManager
Sidepanels/Toolspage
69