SharkRF openSPOT3 - Quick Setup

QuickSetup
QuickSetuphelpsyoutoconfiguretheopenSPOT3withyourtransceiverandconnecttothepreferrednetwork.
Selectthetypeofyourradio
Setsomebasicsettingslikethefrequency,andselectthenetworkyouwanttoconnect(thiswillsetwhich
connectorwillbeused)
Selecttheservertoconnect,settheneedednetworkparameters(likeyourcallsign,IDs,etc.),andclickon
theConnectbutton
AftertheopenSPOT3isconnectedtotheselectedserveritisreadytousewithyourtransceiver
Firststeps
9