EasyManua.ls Logo

SharkRF openSPOT3 - DMR Settings; D-STAR Settings

SharkRF openSPOT3
131 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BothheightvaluesrefertotheheightofyouropenSPOT3(theyareusedseparately).
DMRsettings
ThemodemwillonlyprocessDMRcallswithamatchingColorcode.
IfthesourcecallsignofacrossmodecallhasnoassociatedDMRID,anditcan'tbeparsedintoanumber,then
theDefaultcrossmodesourceDMRIDwillbeusedfortheoutgoingDMRcall.Ifyouaretheonlypersonusing
theopenSPOT3,setthistoyourDMRID,andthenyoudon'tneedtochangethecallsignofyourradiotoyour
DMRID.
IfAdvancedmodeisenabled,thefollowingsettingsshowup:
IfacallisreceivedbythemodemtotheEchoID,thentheopenSPOT3'sbuilt-inlocalechoservicegets
activated.Itwillrecordthecallandplaysitbackafterthecallisfinished.Bothprivateandgroupcallsare
answeredwithaprivateechocallreply.
IftheAllowonlyIDsascrossmodecallsignssettingisenabled,andthesourcecallsignofacrossmodecallhas
noassociatedIDinthedatabase,andalsoitcan'tbeparsedintoaDMRID,thenthecallwillbeignored.
IftheForcesourceIDfrommodemissettootherthan0,thesourceDMRIDofallvoicecallsreceivedbythe
modemwillbereplacedwiththisID.
IftheSendnoin-banddatatonetworksettingisenabled,thenin-banddatacomingfromthemodem(likethe
talkeraliasorin-bandGPSpositioninformation)won'tbesenttothenetwork.
IftheForcetalkeraliastoDMRnetworkisset,thenthistalkeraliaswillbesentforallcallscomingfromthe
modem.
IftheSendnoin-banddatatomodemsettingisenabled,thentheopenSPOT3willremoveallin-banddata
fromcallscomingfromthenetwork.Bydefaultthissettingisenabled.Ifyouhavearadiowhichsupportstalker
aliasdecoding(likeHyteraswithatleastfirmwareversionv8),turnoffthissettingtolettheopenSPOT3pass
throughin-banddatatoyourradio.Ifyouhavearadiowhichdoesnotsupporttalkeraliasdecoding,turnonthis
settingtopreventissueswithdecodingvoicecallscontainingin-banddata(voicestuttering,callsdroppingetc.).
D-STAR®settings
Settingspage
54

Related product manuals