SharkRF openSPOT3 - Page 47

ThissectionisonlyavailableifAdvancedmodeisenabled.
BysettingtheChangetoNullconnectorafterlastcallotherthan0willchangetheactiveconnectortotheNull
connectorafterthelastreceivedcall(minimumtimeoutvalueis5minutes).Forexample,ifyousetatimeoutof
600seconds,openSPOT3willchangetotheNullconnectorifthereisnocallreceivedinthelast10minutes.
IfPowerdowninsteadofchangingtoNullconnectorischecked,thenthedeviceturnsoffwhenthetimeoutis
reached.Thiscanbeusedasanautosleepfeature.
Connectorspage
47