109
Department key positioning
You can assign a department code to each key position. Each key position has a corresponding key number.
Departments may be freely selected for the number of department keys and their positions.
To assign the department to a key position, select the key number of the position.
For key number positions, refer to section “3 Standard key number layout” in chapter “KEYBOARD”.
The key number placement is determined by your local authorized SHARP dealer.
Color Video Monitor (CVM) control character
This programming enables you to assign each department with a number that can be used as a CVM control
character. This number is converted to a two-digit character code that is transmitted for use with a CVM device.
Programming 16 as CVM control character for department 1
To Next Page
Loading...
Need help?
General
