131
Programming of PLU 1 (level 1) and PLU 65 (level 2) are assigned to key no. 21
Item label for remote printer (Dynamic UPC file)
You can program a maximum 12 characters (item label) for each PLU/UPC which are printed by remote printers.
Select the characters you want to program, referring to section “2 How to program alphanumeric characters” in
chapter “PRIOR TO PROGRAMMING”.
* In case that price shift function is allowed, the register prompts to enter a remote printer item level for the
following level by displaying “P2” thru “P6” on the display, and when an item level of level 6 is entered, the
register goes to the status for programming the following PLU/UPC. You must enter texts for all price levels.
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming
the following PLU/UPC.
Programming “MILK_K1, MILK_K2, MILK_K3, MILK_K4, MILK_K5, MILK_K6” for price levels
1 thru 6 of PLU1
2244
.@
1
@
MILK_K1
t
MILK_K2
t
MILK_K3
t
MILK_K4
t
MILK_K5
t
MILK_K6
t
Ç
PrintKey operation
2244
2094
.
@
@t
Ç
PLU code
(max. 5 digits)
Character keys
(max. 12 digits)
To program any PLU/UPC
To keep the current setting
Ä
UPC code
(6 to 13 digits)
*To program for price levels 2 thru 6
(only when price shift function is allowed)
To program for the following PLU/UPC
To Next Page
Loading...
