Sharp ER-A520

140
Functional programming 1
You can set each media for:
GLU/PBLU/Manual PB/CB entry compulsory
Short amount tender entry
Retention of closed GLU/PBLU file
Bill (slip) print compulsory
Footer printing on receipt
This programming decides whether or not your machine should print a message at the foot of a receipt when a
specified media key is used.
Non-add code compulsory
You can enforce the non-add code entry when a media entry is accepted.
Change enable (over tender enable)
Either change enable or disable can be selected for a corresponding media key.
Validation printing compulsory
If media entries must be validated, set the corresponding media for compulsory validation print.
Drawer opening
You can program each media key to or not to open the drawer.
Amount tendered compulsory
You may select amount tendered compulsory or optional for the
a
,
Å
thru
É
,
k
, and thru keys.
You may select amount tendered compulsory or inhibited for the
(
thru keys.
*1: Function no.
89: For the
a
key 120: For the
+
key 134: For the
,
key
90: For the
Å
key 122: For the
,
key 135: For the
,
key
91: For the
Å
key 124: For the
,
key 136: For the
,
key
92: For the
Å
key 126: For the
,
key 82: For the
S
key
93: For the
É
key 128: For the
,
key 94: For the
f
key
114: For the
(
key 130: For the
,
key 238: For the
≥
key
116: For the
)
key 132: For the
k
key
118: For the
*
key 133: For the
,
key
6
7
8
9
CHK2
CHK3
CHK4
CHK5
3
4
2320
.
@
@
s
a
Function no.
ABCDEFGHIJ
*1 *2
To program zero
To program any media function
Procedure
CH9
CHK5
CHK2
Direct2320
PGM 2
Programming for the media keys
7