130
Link PLU/UPC link
PLU/UPC codes must have already been defined.
You can program a maximum of 15 link PLUs/UPCs. A link PLU/UPC can be linked to a maximum
of 5 PLUs.
Programming so that PLU 25, 26 and 27 are linked to PLU 21
Programming of PLU levels and direct PLU keys
You can assign PLU codes to fixed keys in each PLU level and use those keys as direct PLU key.
For assigning a PLU level, press the
l
,
¬
,
Ò
, or key or enter level number and press the
ä
key.
For example, if you want to assign PLU level 1 and key no. 1 to a PLU code, press the
l
key and enter 1
before entering the PLU code.
For key no. position, refer to section “3 Standard key number layout” in chapter “KEYBOARD”.
• PLU codes must have already been defined.
• The key number placement is determined by your local Authorized SHARP Dealer.
To Next Page
Loading...
Need help?
General
