Sharp ER-A520 - Add-On Code

189
EAN-13
• Ordinary EAN-13 code (used in the source marking)
• Specific EAN-13 code (flag 977, 978, 979) (used in the source
marking: ISBM, ISSN)
For entry, you must enter a full of 13 digits number.
• Internal code (used in the in-store marking, the flag character
number: 20 through 29 and 02)
Program the format by the job# 2025.
Add-on code
UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code, excepting
UPC-A without a check digit plus two or five digits add-on code.
Therefore, the total number of digits enterable for sales entries are as shown below:
Your register automatically judges the add-on code in an UPC/EAN code entered from the total
number of digits and the flag.
Note
Code entry No add-on code 2-digit add-on code 5-digit add-on code
UPC-A 12 14 17
UPC-A w/leading zero 13 15 18
UPC-A w/o check digit 11 – –
UPC-E 6 – –
EAN-8 8 – –
EAN-13 13 15 18
C
D
Maker code
Nation code
Item code
C
D
(Free format)
Program the format by the job #2025.
Flag
02, 20-29