176
Setting the AUTO key — Automatic sequencing key —
If you program frequently performed transactions or report sequences for the AUTO keys, you can enter those
transactions simply by pressing the corresponding AUTO keys during key operations. This programming can be
done when your machine is in the X2/Z2 mode.
Programming for the
`
key and
¡
key as follows:
`
; entering a $1.50 item (PLU2) and a $1.00 item (dept. 3)
¡
; selling a $5.00 -programmed- item (dept. 2) for cash
• When the AUTO key has been programmed to execute a report job function etc., the mode switch
must be in the corresponding position.
• The AUTO sequence key can not be preset to another AUTO sequence key.
To Next Page
Loading...
Need help?
General
