Sharp ER-A520

112
For a range of PLUs
PLU codes must have already been defined. If not, an error message "NO RECORD" will appear
on the display.
Programming for PLU 1 for “Associate department 2”
For each PLU/UPC
Programming the PLU 11 thru 20 for “Associate department 3”
For a range
of PLUs
2230
.@
11
@
20
@
3
t
Ç
PrintKey operation
Example
Dept. code
1200
.@
1
@
2
t
Ç
PrintKey operation
Example
Note
2230
.
@
@@
t
Ç
End PLU code
(max. 5 digits)
Associated
dept. code
(1 - 99)
To apply the current
setting of start PLU code
to PLUs within the range
Start PLU code
(max. 5 digits)