155
**P: 3
* Item: Selection: Entry:
A Always enter 0. 0
B Always enter 0. 0
C Zero skip in server/cashier report Yes 0
No 1
D Zero skip in transaction report Yes 0
No 1
E Zero skip in department report Yes 0
No 1
F Zero skip in PLU/UPC report Yes 0
No 1
G Zero skip in hourly report Yes 0
No 1
H Zero skip in daily net report Yes 0
No 1
**P: 4
* Item: Selection: Entry:
A Share % printing in dept. report Yes 0
No 1
B Tip entry method Amount entry 0
Fixed rate entry 1
C Always enter 0. 0
D Always enter 0. 0
E Always enter 0. 0
F Cover count entry Non-compulsory 0
Compulsory 1
G Always enter 0. 0
H Automatic return mode for PLU level shift After each item 0
After each receipt 1
Automatic return mode for PLU level shift: This setting is available only when available mode for
PLU level shift is set to automatic return mode. (See P:2/parameter B shown above.)
**P: 5
* Item: Selection: Entry:
A Always enter 0. 0
B Always enter 0. 0
C Always enter 0. 0
D Always enter 0. 0
E Always enter 0. 0
F Available mode for PLU/UPC price shift REG and MGR modes 0
MGR mode only 1
G PLU/UPC price shift mode Automatic return mode 0
Lock shift mode 1
H Automatic return mode for PLU/UPC price level After each item 0
After each receipt 1
Automatic return mode for PLU/UPC price level: This setting is available only when PLU/UPC price
shift mode is set to automatic return mode (parameter G).
**P: 6 (ABCDEFGH: Always enter 0.)
To Next Page
Loading...
