Useful Features for Camera Recording
Setting the Shutter Speed
2
MENt_ button
Operation button
Press the MENU button until @I appears on
the monitor (Camera mode).
Press ./H+ on the Operation button (f
select “MANUAL”.
El) to
Select “CAMERA MODE” and then press m
to select “MANUAL”.
SHUT SPEED :
WHITE BALANCE :
IRIS
.
.
Press w to select “SHUT. SPEED”.
CAMERA MODE :
Note:
l Pressing n once again will select “WHITE
BALANCE”, not the “IRIS”.
4 P ress m or t( to select the desired shutter
speed.
l You can select from 6 shutter speed
settings from %,n (NORMAL) to V’IOO(K).
_..___............................__ . .._-A..... ._.^..._........_... _..._ . . . . . . . . _._____.__._
c7 53
E
J!NMIMALj=jfm2m:~:/i000/=~]
To Return to the Standard Shutter
Speed
In step 4. press * on the 0 button to select
“NORMAL”.
To reset the VIEWCAM to Full Auto mode. press
b/w to select “CAMERA MODE” and then press
a to select “AUTO” in step 2.
Recommended Shutter Speeds
The faster the shutter speed, the darker the pic-
ture becomes. Select the most appropriate shutter
speed for the ambient light.
Sitmtian
l Recording sports action in
bright daylight
l Recording in bright day-
light at a ski resort
l/l 0000 sec.
I
l/l000 sec.
l Recording outdoor sports
on a somewhat cloudy day
l Recording an outside
scene through a car win-
dow (when you want to
minimize blurs caused by
camera shake)
1 /I 000 sec.
I
l/250 sec.
l When you want to reduce
the light by half. Use as a
substitute for an ND2 filter.
11120 sec.
Note on Recording under Fluorescent
Lighting
If the picture on the monitor flickers when
recording under fluorescent lighting, you may be
able to compensate by changing the shutter
speed to ‘/1x1 sec.
Notes:
l Using a fast shutter speed under fluorescent
lighting will cause flickering in the picture and
possibly periodic colour shifts.
l Recording with a shutter speed higher than l/j,
set (standard) tends to darken the picture.
Record in bright locations when you use a high
shutter speed.
-
To Next Page
Loading...
