Operating Instructions Chapter 2
CLV65x Bar Code Scanner
Safety information
8011980/0000/2009-04-21 © SICK AG · Division Auto Ident · Germany · All rights reserved 13
2 Safety information
This chapter deals with your safety and operator safety in the operational area.
Read this chapter carefully before using the bar code scanner.
2.1 Authorised users
For correct and safe functioning, the bar code scanner must be installed, operated and
maintained by sufficiently qualified staff.
Important Repairs to the bar code scanner should only be carried out by qualified and authorised
SICK AG service staff.
The operating instructions should be made available to the end user.
The end user should be briefed and urged to read the operating instructions by the
technicians.
The following qualifications are required for different activities:
Tab. 2-1: Required qualification for starting up the bar code scanner
Tasks Qualification
Installation, maintenance • Practical technical training
• Knowledge of current health and safety regulations at the work-
place
Electrical installation, device
replacement
• Practical electrical training
• Knowledge of current electrical safety regulations
• Knowledge of start-up and operation of the device in each operati-
onal area (e. g. conveyor system)
Startup and configuration • Basic knowledge of the Windows
TM
operating system
• Basic knowledge of designing and setting up (addressing) Ethernet
connections for connecting the bar code system to the Ethernet
• Basic knowledge of working with an HTML browser (e. g. Internet
Explorer
TM
) for using the online help
• Basic knowledge of data transfer
• Basic knowledge of bar code technology
Operation of the device in
each operational area
• Knowledge of start-up and operation of the device in each operati-
onal area (e. g. conveyor system)
• Knowledge of the software and hardware environment in each
operational area (e. g. conveyor system)
To Next Page
Loading...
Need help?
General
