17
8027605/V1-0/2022-03| SICK S Y S T E M D E S C R I P T I O N | ALIS
Subject to change without notice
SYSTEMS DESCRIPTION 3
3 Systems Description
The ALIS is a fully automatic reading gate including frame, scan heads with on-board
decoder, local network controller and host communication for reading bar codes on flight
baggage, which in turn is located e.g. on conveyor belts, cross belts or tilt tray sorter sys-
tems.
The local network-controller incorporates a controller for the local scanner-network, opto-
isolated digital diagnostic software, flexible HOST-Interface and an interface supplying diag-
nostic data to the Diagnostic Tool “Baggage Analytics” or "Logistics Diagnostic Analytics".
More information about the diagnostic software can be found on SICK.com.
The HOST-interface can be adapted to customers specific requirements in terms of HOST-
Protocol and physical interface.
The complete system consists of a certain amount of bar code readers or/and RFID reader
and antennas - depending on the application -, the control unit MSC800 unit, photoelectric
switches for object-trigger, cables and an increment encoder for measuring the conveyor
speed.
System Types
● ALIS Laser - Laser based bar code reading
● ALIS Cam - Matrix cameras based bar code reading, two versions:
– with 10 matrix cameras, 2 of them for bottom reading
– with 8 matrix cameras and 2 laser scanners for bottom reading
● ALIS RFID - Reading and assignment of RFID tags
● ALIS Hybrid - combination of RFID and further identification readers, two versions:
– with RFID and laser scanners
– with RFID and matrix cameras
To Next Page
Loading...
