SICK scanGrid2 I/O

7.7 Report (Safety Designer)
Overview
T
he Report page shows the settings and data of the safe multibeam scanner. You have
the option of saving and archiving the report as a PDF.
Safety Designer creates a new report the first time you open the Report page. If you click
on Update after making changes to the configuration, you will receive an updated report.
1
Content of the report
2
Composition of the report
Composition of the report
Y
ou can assemble the contents of the report as required.
Complementary information
N
ational and international standards promote or recommend specific data and the
person responsible for it. The required data are included in the report.
7.8 Service (Safety Designer)
Overview
T
he following functions are available on the Service page when the device is connected
via the USB connection:
CONFIGURATION 7
8025936/2021-01-08 | SICK O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
57
Subject to change without notice