SICK scanGrid2 I/O

When initialization is complete, the LEDs indicate the current operational status of the
s
afe multibeam scanner. In normal operation, the STATE LED lights up green or yellow
(e.g. warning field interrupted) and the OSSD-LED lights up green or red (protective field
interrupted).
Further topics
•
"T
roubleshooting", page 66
8.5 Check during commissioning and modifications
The test is intended to ensure that the hazardous area is monitored by the protective
de
vice and any attempted access to the hazardous area is prevented.
b
Carry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
COMMISSIONING 8
8025936/2021-01-08 | SICK O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
61
Subject to change without notice