2.3 Inappropriate use
The safe multibeam scanner works as an indirect protective measure and cannot
pr
ovide protection from ejected parts or from emitted radiation. The safe multibeam
scanner cannot be used to detect objects that do not reflect light or reflect it incorrectly.
The safe multibeam scanner is not suitable for the following applications, among
others:
•
Outdoors
•
Underwater
•
In environments with increased levels of ionizing radiation
•
In explosion-hazardous areas
2.4 Requirements for the qualification of personnel
The protective device must be planned in, installed, connected, commissioned, and
ser
viced by qualified safety personnel only.
Project planning
For project planning, a person is considered competent when he/she has expertise and
experience in the selection and use of protective devices on machines and is familiar
with the relevant technical rules and national work safety regulations.
Mechanical mounting, electrical installation, and commissioning
F
or the task, a person is considered qualified when he/she has the expertise and
experience in the relevant field and is sufficiently familiar with the application of the
protective device on the machine to be able to assess whether it is in an operationally
safe state.
Configuration
F
or configuration, a person is considered competent when he/she has the expertise
and experience in the relevant field and is sufficiently familiar with the application of
the protective device on the machine that he/she can assess its work safety aspects.
Operation and maintenance
F
or operation and maintenance, a person is considered competent when he/she has
the expertise and experience in the relevant field and is sufficiently familiar with the
application of the protective device on the machine and has been instructed by the
machine operator in its operation.
SAFETY INFORMATION 2
8025936/2021-01-08 | SICK O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
9
Subject to change without notice
To Next Page
Loading...
Need help?
General