AddFEM
Technical Data
4-19
AddFEM
C79000–G8076–C900–03
Byte
number
Range Value (hex)
23 Configuration of the FEF 00 = ”Basic functionality”
01 = ”Positioner 8 channels”
02 = ”NoName0”
03 = ”NoName1”
24 Configuration of the operating mode 00 = ”Standard 1–channel”
01 = ”AS red. AddFEM 1–channel ”
02 = ”AS 1–channel AddFEM red. ”
03 = ”AS red. AddFEM red.
Note
At 6DL3100–8AC parameterization contains further setting possibilities. Informa-
tion on further parameterization can be found in the manuals of the FEFs. The ma-
nuals of the FEFs are stored on the AddFEM CD in the directory of the correspon-
ding order number.
4.3.2 Input Telegram
The input telegram for using the AddFEM without preprocessing function encom-
passes 52 bytes. When the AddFEM is operated with preprocessing function (FEF,
only possible as from variant 6DL3100–8AB), an extended telegram structure with
122 bytes is used. At variant 6DL3100–8AC the length of the extended message
depends of the configured FEF.
Bit 15... Bit 8... Bit 7... ...Bit 0
Word
No.
Byte ad-
dress
offset
Meaning of ”high” byte
(Address + 1)
Meaning of ”low” byte
(Address +0)
1 1/0 DIO 16... [DI 1–16 – combined with DO 1–16] ...DIO 1
2 3/2 Qualifier DO 16... [Qualifier DO] ...Qualifier DO 1
3 5/4 Reserve Qualif. AO 8 .[Qualif.AO] .Qualif. AO 1
4 7/6 DI 16... [DI 1–16 ] ...DI 1
5 9/8 AI 1
6 11/10 AI 2
7 13/12 AI 3
8 15/14 AI 4
9 17/16 AI 5
10 19/18 AI 6
11 21/20 AI 7
12 23/22 AI 8
13 25/24 AI 9
14 27/26 AI 10
15 29/28 AI 11
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
