Siemens D7-SYS - Operator Devices Which Can be Connected

Communications configuring
3-228 System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
You can configure the following function blocks for additional functions:
• Function block CBRFAW
To receive the alarms from a COMBOARD
• CRV
The receive block distributes values from a data interface to the block
inputs of function blocks of the same CPU.
Only max. 16 PZD words can be received and sent using a
COMBOARD (e.g. CBP2).
• CTV
The function block only acquires and sends block output values from
the CPU function blocks, on which it is configured.
3.19.2.5 Operator devices which can be connected
You can use the “DRIVE ES” or “DRIVE Monitor“ configuring software to
parameterize the FM 458 application module