Communications configuring
System- and communication configuring D7-SYS - SIMADYN D 3-309
Edition 12.2003
AT Send channel name to the VI ´ACKVCH´
AR Receive channel name from the VI ´CMDVCH´
NC No. of connected CIs 1
CVP Connection with CI, connection CCV >(CI.CCV)
I/O name Significance Example
CTS Processor name D01-P1
AT Send channel name to the SER02 ´CMDH´
AR Receive channel name from the SER02 ´ACKH´
ADT Data channel name from the SER02 ´DATH´
CCV Connection with VC, connection CVP <VC.CVP
I/O name Significance Example
CTS Processor name D01-P1
AT Send channel name to the CI ´ACKH´
AR Receive channel name from the CI ´CMDH´
ADT Data channel name to the CI ´DATH´
CLT Length, send channel 116
CLR Length, receive channel 524
CLD Length, data channel 432
TPD For operator control and visualization (HMI) 0
NL Maximum number of MWLs (measured value lists) 40
NV Max. number of measured values (connections) 500
NOTE
In addition, the @CMM central block must be configured for the buffer
memory module and the @CSH11 central coupling block.
I/O name Significance Example
CTS Name of the interface used (CSH 11) ´D0300C´
MAA Industrial Ethernet address (SIMADYN D) 080006010002
CDV Memory re-structure (1) 0
I/O name Significance Example
CTS Processor name ´D01_P1´
CDV Memory re-structure (1) 0
FB CI
FB SER02
FB @CSH11
FB @CPN
To Next Page
Loading...
