Systemsoftware
2-10 System- and communication configuring D7-SYS - SIMADYN D
Edition 03.2001
T1 = 0,5 ms
T3 = 4,0 ms
T2 = 1,0 ms
T4 = 8,0 ms
T5 = 64,0 ms
I3 = S7
I2 = E2
...
I8 = IL
CFC charts
I1 = C1
Cyclic
Interrupt-controlled
T0
Operating system
Operating system
. .
CFC charts
e.g.
e.
.
Fig. 2-1 Function block processing by the operating system
The actual open-loop and closed-loop control task can be implemented
using SIMATIC TDC/SIMADYN D, almost the same as in a block
diagram, by interconnecting and parameterizing the function blocks. A
function block type can be used as often as required. The function blocks
are parameterized and interconnected at the block inputs and outputs.
Executing the
function blocks
To Next Page
Loading...
