Siemens LMV5 Series Technical Instructions

Technical Instructions LMV Series
Document No. LV5-100
0
Section 10 Page 20 SCC Inc.
AZL5 Software Update: Version 0500 to 0510
The following updates were made with A
ZL5 software version 0510:
1. The AZL52 normal operation indicator is switched between the internal and external
setpoint depending on the switch position X62.
2. For parameters SD_ModOn and SD_ModOff, larger values are permitted for the
switch-off hysteresis.
3. Parameter name corrections Dutch 1.
4. Parameter name corrections Dutch 2.
5. Parameter name corrections French.
6. Additional display value Fahrenheit / Temperature, is calculated correctly / displayed for the
load controller from V02.20.
7. The maximum value of the safety times can be changed on the OEM access level.
8. New parameter Pos. tolerance for variable tolerance specification of the actuators and the
VSD.
9. Parameter name correction German Handbetrieb replaced with Manueller Betrieb.
HOME

Siemens LMV5 Series Specifications

General

Brand	Siemens
Model	LMV5 Series
Category	Control Systems
Language	English