Operator control
8.1 Device interface
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
111
Display title
The display title in the header of the display contains the following information:
● Designation of the measured variable
● Designation of the measured value property
● Display number of the measured variable
Designation of the measured variable
The first position in the display title contains the designation of the measured variable
displayed. Since the length of the line is restricted, the unit of the measured variable is also
used as the name.
The following table lists the designations:
Measured variable Designations of the measured variable in the Display
Display title Main menu Number
Phase-to-neutral voltage V
a-n
/ V
b-n
/ V
c-n
Vph-n VOLTAGE 1.0
Phase-to-phase voltage V
a-b
/ V
b-c
/ V
c-a
Vph-ph VOLTAGE 2.0
Current I
a
/ I
b
/ I
c
AMPS CURRENT 3.0
Apparent power VA
a
/ VA
b
/ VA
c
VA APPARENT POWER 4.0
Active power ±W
a
/ ±W
b
/ ±W
c
W ACTIVE POWER 5.0
Reactive power ±VAR
a
/ ±VAR
b
/ ±VAR
c
VAR REACTIVE POWER 6.0
Collective power values:
• Total apparent power
• Total active power
• Total reactive power
TOTAL VA, W, VAR TOTAL POWER 7.0
Power factor |PF
a
| / |PF
b
| / |PF
c
| PF POWER FACTOR 8.0
Total power factor TOTAL PF TOTAL POWER FACTOR 9.0
System frequency f FREQ FREQUENCY 10.0
THD voltage THD-V
a
/ THD-V
b
/ THD-V
c
THD-V THD VOLTAGE 11.0
THD current THD-I
a
/ THD-I
b
/ THD-I
c
THD-I THD CURRENT 12.0
Active energy import/export ±W
a..c
• On peak
• Off peak
ACTIVE ENERGY ACTIVE ENERGY 13.0
13.1
Reactive energy positive/negative ±Wvar
a..c
• On peak
• Off peak
REACTIVE ENERGY REACTIVE ENERGY 14.0
14.1
App. energy Wva
a..c
• On peak
• Off peak
APPARENT ENERGY APPARENT ENERGY 15.0
Universal counter UNIVERSAL COUNTER UNIVERSAL COUNTER 16.0
Working hours counter Bh WORKING HOURS WORKING HOURS 17.0
Unbalance
• Voltage
• Current
UNBAL. %V, %A UNBALANCE 18.0
Device settings SETTINGS SETTINGS 20.1
To Next Page
Loading...
