Connection
6.2 Connecting the main circuit
62 Manual, 08/2017, L1V30368969104A-02
Mounting version 3 to 6 of copper bar connection kit
1. Insert the connection, part A (3KC9811-0) between the two connecting terminals.
Figure 6-37 Inserting connection, part A
2. Mount the bracket, part D (3KC9811-4), with the supplied bolts on the outside of the
connecting terminals to secure the connection, part A.
Figure 6-38 Mounting bracket, part D
3. Position the T piece, part C (3KC9811-3) with the supplied bolts as shown in the figure on
top of the already mounted parts A and D.
Figure 6-39 Mounting the T piece
To Next Page
Loading...
