Connection
6.3 Connecting the control circuit
98 Manual, 08/2017, L1V30368969104A-02
Connecting power supply kit 3KC9833-, 3KC9834- for single-phase network
The power supply kit 3KC9833-, 3KC9834- for 2-pole applications consists of one phase and
a neutral conductor. On the one hand, it includes voltage measurement by the relevant
inputs (103 and 106 as well as 203 and 206), and on the other, it supplies the electronic
module with power.
After you have mounted the power supply kit between the connecting terminals in
accordance with the section titled Installing accessories for the electronic module (Page 89),
you can connect the electronic module with the accessories. The following inputs are
connected with the cable:
● Inputs for power supply (101 and 102 as well as 201 and 202)
● Inputs for voltage measurement (103 and 106 as well as 203 and 206)
1. To connect the accessories with the electronic module, proceed as shown in the figure.
Figure 6-85 Connecting the power supply kit for single-phase networks
To Next Page
Loading...
