Function
Symbols
Function Class acc. to
IEC 61000-4-30
Range Additional Information
U
dip
, U
swl
Supply voltage dips and swells S – –
U
int
Supply voltage interruptions S – –
u
2
Supply voltage unbalance S 0.5 % to 5.0 % –
U
h
Voltage harmonics S 10 % to 200 % of Class 3
of IEC 61000-2-4
–
Under/over Under/over deviation – – –
I Magnitude of current S 10 % FS to 150 % FS –
i
2
Current unbalance S – –
I
h
Harmonic currents S – –
Ordering Information
You can obtain the order information for the device from the catalog SICAM – Power Quality and Measure-
ments with an order key or from https://new.siemens.com/global/en/products/energy/energy-automation-
and-smart-grid/power-quality-measurement.html.
NOTE
This document describes all functions and features available in the device with a maximum equipment. You
can find the individual equipment of your device in the ordering variant or the catalog mentioned above.
Scope of Delivery
The delivery comprises the following components depending on the ordering code:
•
A device according to the ordering code (see catalog)
•
Battery (insulated in the battery compartment of the device)
•
A 2 GB micro SD card
•
Assembly elements
•
Product Information
Accessories
You can order the following accessories:
•
Device manual, download available at https://new.siemens.com/global/en/products/energy/energy-auto-
mation-and-smart-grid/power-quality-measurement.html
•
RS485 bus terminating plug 220 Ω in a 9-pin D-sub connector plug
•
Connectors for alternating voltage inputs
•
Various cables as listed in the following tables:
Introduction
1.2 Device Overview
22 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
