KP8, KP8F, KP32F
Operating Instructions, 11/2011, A5E03284305-02
23
Safety instructions and approvals
2
2.1 Safety Instructions
WARNING
Injury or material damage
If you do not follow precisely the safety guidelines and manuals in this handbook, this may
result in sources of danger and make safety functions ineffective. This can result in
personal injuries or material damage.
Follow the safety guidelines and instructions precisely.
Observe the safety and accident prevention instructions applicable to your application in
addition to the safety instructions given in this manual.
Project security
WARNING
Injury or material damage
The configuration engineer for a system controller must take precautions so that an
interrupted program can be restarted normally after voltage dips or power failures.
A dangerous operating state must not occur during the entire process of the control
program, also during troubleshooting - also not in the short-run.
To Next Page
Loading...
Need help?
General
