Assigning parameters for the HMI device in STEP 7
6.6 Assigning parameters for Media Redundancy Protocol and Isochronous Real-Time
KP8, KP8F, KP32F
94 Operating Instructions, 11/2011, A5E03284305-02
6.6 Assigning parameters for Media Redundancy Protocol and
Isochronous Real-Time
KP8, KP8F and KP32F are designed for MRP and IRT.
See the STEP 7 Online Help for a description of how to configure MRT and IRT in STEP 7.
You will find detailed information in the following manual:
You can find additional information on device names and device number in the manual
"SIMATIC PROFINET System Description
(http://support.automation.siemens.com
/WW/view/en/19292127)".
To Next Page
Loading...
