Safety instructions and approvals
2.2 Approvals
KP8, KP8F, KP32F
26 Operating Instructions, 11/2011, A5E03284305-02
FM approval
"Factory Mutual Research" approval in accordance with Approval Standard Class
Number 3611, 3600, 3810
Approved for use in:
● Class I, Division 2, Group A, B, C, D Tx
● Class I, Zone 2, Group IIC Tx
UL approval
Please note the following:
● The device shall be supplied from an isolating source, rated 24 VDC.
● For use on a flat surface of a Type 1, 4X (indoor use only) and 12 Enclosure.
● Only for use in LAN, not for connection to telecommunication circuits.
"Underwriters Laboratories Inc." approval in accordance with:
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
"Underwriters Laboratories Inc." approval in accordance with:
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● UL 1604 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in:
● Class I, Division 2, Group A, B, C, D or
● Class I, Zone 2, Group IIC or
● Non-hazardous locations
Approval for Australia and New Zealand
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
Approval for Korea
This product meets the requirements of the Generic standards - Emission standard for
industrial environments.
To Next Page
Loading...
Need help?
General
