13 SIMATIC NCM PC Project Engineering Tool
162
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
Notice
Optional packages are not supported by SIMATIC NCM PC. If you are editing a
project that was created or edited in STEP 7, it may contain components from
STEP 7 optional packages. If this is the case, you can only edit stations using
SIMATIC NET PC that do not contain components from STEP 7 optional
packages.
How to Start SIMATIC NCM PC
Go to the Start menu and select Start
"
SIMATIC
"
SIMATIC NCM PC Manager .
Further Information in Help
The following integrated help system functions will also provide you with detailed
information:
S Help
"
Introduction
Contains a brief description of SIMATIC NCM PC
S Help
"
Getting Started
Here you will find brief instructions on how to create a PC station, its
applications and modules. For more detailed information, you can go from here
to the PC topics in the main help system.
These instructions are available only in Help on SIMATIC NCM PC. In STEP 7,
select the Help menu directly:
S Help
"
Contents
Here you will find help topics relating to the PC station under:
- Configuring Hardware / SIMATIC PC Station
- Configuring Connections for a SIMATIC PC Station
To Next Page
Loading...
Need help?
General
